| |
Engine
Model |
CA6DL1-28 |
CA6DL1-26 |
Type |
6-cylinder
in line, 4-stroke,water-cooled, direct injection,
turbocharged, air-to-air intercooled |
Rated
Power |
206kW
(280hp) @ 2300rpm |
192kW
(260hp) @ 2300rpm |
Max.
Torque |
1100N.m
@ 1400rpm |
1000N.m
@ 1400rpm |
Bore
& Stroke |
110×135mm |
Displacement |
7.7L |
Compression
Ratio |
17.5 |
Specific
Fuel Consumption |
200g/(kW.h) |
emission
rating |
Euro-2 |
Euro-2 |
Air
Compressor |
380L/min
@ 2300rpm |
Lube
Oil System |
Full
flow oil filter, centrifugal oil filter, turbocharger
oil filter |
| Starting System |
Starter:
24V 6kW
Alternator: 28V 1.5kW, with built-in regulator
Cold starting aid: grid-type pre-heater |
Air
Intake System |
Dual
paper element air filter with air restriction indicator |
Fuel Supply System |
One
frame-mounted primary fuel filter and two engine-mounted
secondary fuel filters
Fuel Tank Capacity: 386L |
Exhaust
System |
Horizontal
muffler with flexible pipe |
| Cooling
System |
Radiator:
tube-type aluminum radiator with coolant recovery
tank
Fan: Lightweight plastic with viscous type drive |
Clutch
--Dry single Φ430mm plate
--Diaphragm spring
--Hydraulic control with air assist
--Non-asbestos composite friction material
Transmission
--Shanxi Fuller 9JS135 mechanical transmission with auxiliary
case, 9 forward speeds and 1
reverse (CA6DL1-28 only)
--Ratios: 1st 12.11, 2nd 8.08, 3rd 5.93, 4th 4.42, 5th 3.36,
6th 2.41, 7th 1.76, 8th 1.32,
9th 1.00, Rev. 12.66
--Shanxi Fuller 8JS118 mechanical transmission with auxiliary
case, 8 forward speeds and 1
reverse (CA6DL1-26 only)
--Ratios: 1st 11.40, 2nd 7.94, 3rd 5.63, 4th 4.06, 5th 2.81,
6th 1.96, 7th 1.39, 8th 1.00, Rev. 11.35
Front axle
--Drop forged "I" beam, rear mounted tie rod
--Rated axle capacity: 7000 kg
--Integral power steering, tilt and telescopic steering
column
--Suspension: Semi-elliptic multi-leaf springs with telescopic
double acting shock absorbers
--8.00V-20 steel disc wheels and 11.00-20-16PR tires (Single,
bias tube-type)
Rear axle
--Ф457 cast axle, 5.286 ratio, full-floating
--Rated axle capacity: 23000 kg
--Suspension: Balance spring, semi-elliptic multi-leaf
--8.00V-20 steel disc wheels and 11.00-20-16PR tires (Dual,
bias tube-type)
Brake
--Front and rear dual-circuit independent air brake system
with air dryer
--Reservoirs: Four 35L steel reservoirs and one 15L steel
reservoir
--Service brakes: Air actuated, drum type, brake drum inner
diameter: 400mm
--Brake shoe width: Front 135mm, rear 200mm
--Parking brake: Pneumatically controlled spring brakes,
operated by manually actuated
valve in conjunction with quick release
valve, acting on rear wheels
--Exhaust brake: Electrically controlled, pneumatically
activated butterfly valve in exhaust pipe
Frame
--Ladder type, channel section side rails
--Cross section dimensions: 280×90×8mm (with
5mm inner reinforcement)
--Assembled width: 865mm in the front and rear
Cab
--Model J5M all steel welded COE (cab over engine) design,
2-point spring/hydraulic
suspension, 44 degree hydraulic cab tilt
system with safety latch
--Cab glass: Laminated windshield and tempered side &
rear windows
--Windshield wipers: 3-blade, electric-driven, 2 speed &
intermittent
--Driver seat: Height, position & seat back angle adjustable
with helical suspension, cloth
with head rest
--Passenger seat: Back angle adjustable with helical spring,
cloth with high back
--Seat Belts: Driver & passenger, 3-point type
--AM/FM stereo radio with cassette
--Meters & Gauges: Speedometer, tachometer, coolant
temperature gauge, air pressure
gauge
--Warning Lights & Buzzers: Cab lock warning light &
buzzer; Low coolant level warning
light & buzzer; Low oil pressure
warning light & buzzer; Low air pressure warning
light & buzzer; Parking brake indicator
light
Body
--Dump - fully welded, latching tailgate, integral splash
guards, cab shield
Electrical system
--24 Volt, negative ground system
--Battery: 6-QAW-180D, capacity: 2×180A.h
--Combination halogen headlamps/marker lamps
--Combination stop, tail and back-up lamps with reflector
Weights (kg)
--Curb weight: 15800
--Front dual axle curb weight: 5950
--Rear dual axle curb weight: 9850
--Load capacity: 20000
Dimensions (mm)
--Overall dimensions (length ×width × height):
10115×2490×2730
--Body inner dimensions (length × width × height):
7200×2300×1400
--Track (front/rear): 1944/1847
--Wheelbase: 1900+3650+1350
--Front overhang: 1375
--Back of cab to tandem axle center: 5285
--Rear axle center to end of frame: 1085
Performance
--Top speed: 86km/h
--Fuel consumption at 65km/h with full load: 32L/100km
--Min. turning radius: 10.7m
--Max. outside noise level under acceleration: 84dB(A)
--Min. ground clearance: 245mm |
